80.50V5KR5482LIKI3 - Radial drill. and mill. head offset, EWS - Varia V5- Adaptor, with tapered roller bearing, DIN 5482 drive, Int. / ext. coolant pmax = 70bar, i =3:1 direction of rotation inver.,
Article number: 166654Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
EWS.Varia
The Varia system has meanwhile been replaced by Varia VX. The new system is the logical further development of the successful quick-change system and brings with it various advantages.
If you are planning a new acquisition, we recommend that you purchase the current system directly.
If you are already using the Varia system in your production, please contact us. An upgrade to the new version may be possible and worthwhile for you.
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 132.00 mm |
|---|---|
| Total height (OAH) | 125.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 4500 min-1 |
| Transmission relation (TR) | 3:1 |
| Transmission torque, output drive 1 (DINH201) | 240.00 Nm |
| Shank size | VDI50 |
| Interface size | EWS Varia V5 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5482 |
| Alignment system | Pin (Bar) |
| Article number | 166654 |
|---|---|
| Product weight | 19.14 KG |