50.50ABS50KRSQT28RIK - Ax. drill. and mill. head offset, ABS50 (Lizenz Komet ), with tapered roller bearing, Coupling MAZAK SQT-Serie, Int. / ext. coolant pmax = 70bar,
Article number: 163057Загрузить PDFAxial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Total height (OAH) | 96.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 100.00 Nm |
| Max. rotational speed, input (RPMX) | 4000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 100.00 Nm |
| Shank size | VDI50 shaft rotated 30° |
| Interface size | ABS 50 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | Pin |
| Article number | 163057 |
|---|---|
| Product weight | 11.399 KG |