80.6050HEYRIK - Radial drill. and mill. head offset, For collet 500 477E (ER50 Ø12-34), crown coupling drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output),
Article number: 147368Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER50 DIN6499
- Clamping range Ø12-34
- For collet 500 477E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 220 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 120.00 mm |
|---|---|
| Total height (OAH) | 104.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 160.00 Nm |
| Max. rotational speed, input (RPMX) | 3000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 160.00 Nm |
| Shank size | VDI60 |
| Interface size | Collet ER50 |
| Coolant intake | Inner and outer cooling |
| Coupling | Claw coupling |
| Alignment system | Pin (Bar) |
| Article number | 147368 |
|---|---|
| Product weight | 18.988 KG |