VCGT-AS
35 Rhombic Inserts with a 7 Positive Flank’ Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum(+)
| Designation | L | IC | S | RE | D1 | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| VCGT 110302-AS | 11.10 | 6.35 | 3.18 | 0.20 | 2.90 | 0.20 | 2.50 | 0.05 | 0.20 | IC1520 IC20 IC520 IC920 | |
| VCGT 110304-AS | 11.10 | 6.35 | 3.18 | 0.40 | 2.90 | 0.50 | 3.00 | 0.05 | 0.25 | IC1520 IC20 IC520 | |
| VCGT 160401-AS | 16.60 | 9.52 | 4.76 | 0.10 | 4.40 | 0.20 | 2.50 | 0.05 | 0.20 | IC20 | |
| VCGT 160402-AS | 16.60 | 9.52 | 4.76 | 0.20 | 4.40 | 0.50 | 2.50 | 0.05 | 0.25 | IC1520 IC20 | |
| VCGT 160404-AS | 16.60 | 9.52 | 4.76 | 0.40 | 4.40 | 0.50 | 3.00 | 0.05 | 0.25 | IC1520 IC20 IC520 | |
| VCGT 160408-AS | 16.60 | 9.52 | 4.76 | 0.80 | 4.40 | 0.50 | 3.00 | 0.10 | 0.25 | IC1520 IC20 | |
| VCGT 160412-AS | 16.60 | 9.52 | 4.76 | 1.20 | 4.40 | 0.50 | 3.00 | 0.10 | 0.25 | IC1520 IC20 IC520 | |
| VCGT 220520-AS | 22.10 | 12.70 | 5.56 | 2.00 | 5.50 | 1.50 | 4.50 | 0.15 | 0.30 | IC1520 | |
| VCGT 220530-AS | 22.10 | 12.70 | 5.56 | 3.00 | 5.50 | 1.50 | 4.50 | 0.15 | 0.30 | IC1520 IC20 |