TPMR
Triangular 11 Positive Inserts with a Positive Chipformer Exerting Low Cutting Forces for Internal Finish Turning(+)
| Designation | L | IC | S | RE | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|
| TPMR 090202 | 9.60 | 5.56 | 2.38 | 0.20 | 0.10 | 0.20 | 1.00 | 3.00 | IC907 | |
| TPMR 090204 | 9.60 | 5.56 | 2.38 | 0.40 | 0.15 | 0.20 | 1.00 | 3.50 | IC9250 IC9150 | |
| TPMR 110304 | 11.00 | 6.35 | 3.18 | 0.40 | 0.15 | 0.25 | 1.00 | 3.50 | IC830 IC20N | |
| TPMR 110308 | 11.00 | 6.35 | 3.18 | 0.80 | 0.15 | 0.30 | 1.00 | 3.50 | IC830 | |
| TPMR 160304 | 16.50 | 9.52 | 3.18 | 0.40 | 0.15 | 0.33 | 1.00 | 4.00 | IC830 IC20N IC807 IC907 | |
| TPMR 160308 | 16.50 | 9.52 | 3.18 | 0.80 | 0.15 | 0.35 | 1.00 | 4.00 | IC830 IC20N IC807 IC907 |