80.4020CTXLIKTFIMHSD - Radial drill. and mill. head offset, For collet 200 428E (ER20 Ø2-13), DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output), adjusting system for Trifix turret, inside collet nut, Highspeed,
Article number: 173546Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER20 DIN6499
- Clamping range Ø2-13
- For collet 200 428E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 75 Nm
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
Trifix© (TF) alignment system
- Tool completely preset
- Faster setup of your machine
- Repeatability < 6µm at 200mm throat depth
- Positioning accuracy of 0.01mm from one station to another
Highspeed
- High precision spindle bearings
- Lower heat generation at high speeds
- Not suitable for heavy machining
- Observe maximum permissible speed
| Functional length (LF) | 100.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 10000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | VDI40 |
| Interface size | Collet ER20 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Trifix |
| Article number | 173546 |
|---|---|
| Product weight | 7.254 KG |