50.40KM50KR5482RIKI3 - Ax. drill. and mill. head offset, Adaptor KM50, with tapered roller bearing, Coupling DIN 5482, Int. / ext. coolant pmax = 70bar, i =3:1 direction of rotation inver.,
Article number: 119397Загрузить PDFAxial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Reduction ratio
A reduction ratio is required for heavy cutting operations. The torque is increased according to the reduction ratio. Please refer to the technical data for the exact reduction ratio.
| Total height (OAH) | 100.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 40.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 2,895:1 |
| Transmission torque, output drive 1 (DINH201) | 120.00 Nm |
| Shank size | VDI40 |
| Interface size | KM 50 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5482 |
| Alignment system | Pin (Bar) |
| Article number | 119397 |
|---|---|
| Product weight | 11.752 KG |