SNGN-Ceramic
Square Double-Sided Ceramic Inserts with a Flat Rake for Machining Cast Iron’ Hardened Steel and Super Alloys(+)
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|
| SNGN 090412T | 9.52 | 4.76 | 1.20 | 0.10 | 3.00 | 0.10 | 0.50 | IS8 | |
| SNGN 120404T | 12.70 | 4.76 | 0.40 | 0.10 | 3.50 | 0.10 | 0.50 | IN22 | |
| SNGN 120408T | 12.70 | 4.76 | 0.80 | 0.10 | 3.50 | 0.10 | 0.50 | IW7 IS8 IN23 IN22 IN420 | |
| SNGN 120412T | 12.70 | 4.76 | 1.20 | 0.10 | 5.00 | 0.10 | 0.50 | IW7 IS8 IS80 IS6 IN23 IN22 IN420 | |
| SNGN 120416E | 12.70 | 4.76 | 1.60 | 0.10 | 5.00 | 0.10 | 0.50 | IS9 | |
| SNGN 120416T | 12.70 | 4.76 | 1.60 | 0.10 | 5.00 | 0.10 | 0.50 | IW7 IS8 IS80 IN22 IN420 | |
| SNGN 120708T | 12.70 | 7.94 | 0.80 | 0.10 | 5.00 | 0.10 | 0.50 | IW7 IN22 IN420 | |
| SNGN 120712T | 12.70 | 7.94 | 1.20 | 0.10 | 5.00 | 0.10 | 0.50 | IW7 IS80 IN23 | |
| SNGN 120716T | 12.70 | 7.94 | 1.60 | 0.10 | 5.00 | 0.10 | 0.50 | IN22 | |
| SNGN 150712T | 15.88 | 6.35 | 1.20 | 0.10 | 5.00 | 0.10 | 0.50 | IW7 |