RNGN-Ceramic
Double-Sided Round Ceramic Inserts for Machining Cast Iron’ Nickel Based Alloys and Hardened Steel(+)
| Designation | IC | S | ap (min) |
ap (max) |
ft (min) |
ft (max) |
fz (min) |
fz (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|
| RNGN 090300T | 9.52 | 3.18 | 0.10 | 2.00 | 0.07 | 0.20 | IW7 IN22 | |||
| RNGN 090400T | 9.52 | 4.76 | 0.10 | 2.00 | 0.07 | 0.20 | IW7 | |||
| RNGN 120400T | 12.70 | 4.76 | 0.10 | 3.50 | 0.07 | 0.50 | IW7 IN22 IN420 | |||
| RNGN 120700 S6 | 12.70 | 7.94 | 0.10 | 2.00 | – | – | IW7 | |||
| RNGN 120700E | 12.70 | 7.94 | 0.10 | 2.00 | 0.07 | 0.20 | 0.10 | 0.25 | IW7 IS35 IS25 | |
| RNGN 120700E-CH | 12.70 | 7.94 | 0.10 | 2.00 | 0.07 | 0.20 | 0.10 | 0.25 | IS35 IS25 | |
| RNGN 120700T | 12.70 | 7.94 | 0.10 | 4.50 | 0.07 | 0.50 | 0.10 | 0.25 | IW7 IS35 IS25 IN23 IN22 IN420 | |
| RNGN 120700T-CH | 12.70 | 7.94 | 0.10 | 4.50 | 0.07 | 0.50 | 0.10 | 0.25 | IS35 IS25 | |
| RNGN 120700TE | 12.70 | 7.94 | 0.10 | 4.50 | 0.07 | 0.50 | 0.10 | 0.25 | IS35 IS25 | |
| RNGN 120700T02020 | 12.70 | 7.94 | 0.10 | 2.00 | 0.07 | 0.20 | IW7 | |||
| RNGN 150700T | 15.88 | 7.94 | 0.10 | 3.00 | 0.07 | 0.20 | IW7 | |||
| RNGN 190700T | 19.05 | 7.94 | 0.10 | 3.00 | 0.07 | 0.20 | IW7 | |||
| RNGN 190700TE | 19.05 | 7.94 | 0.10 | 3.00 | 0.07 | 0.20 | IS35 IS25 |