DNMG-F3M
Double-Sided 55 Rhombic Inserts for Finish on Turning Stainless and Low Carbon Steel(+)
| Designation | L | IC | S | RE | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|
| DNMG 110404-F3M | 11.63 | 9.52 | 4.76 | 0.40 | 0.05 | 0.32 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 | |
| DNMG 110408-F3M | 11.63 | 9.52 | 4.76 | 0.80 | 0.10 | 0.42 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 | |
| DNMG 110412-F3M | 11.63 | 9.52 | 4.76 | 1.20 | 0.15 | 0.52 | 0.15 | 2.00 | IC6025 IC6015 IC806 IC807 | |
| DNMG 150404-F3M | 15.50 | 12.70 | 4.76 | 0.40 | 0.05 | 0.30 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 IC804 | |
| DNMG 150408-F3M | 15.50 | 12.70 | 4.76 | 0.80 | 0.10 | 0.40 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 | |
| DNMG 150412-F3M | 15.50 | 12.70 | 4.76 | 1.20 | 0.15 | 0.50 | 0.20 | 2.50 | IC6025 IC6015 IC806 IC807 | |
| DNMG 150604-F3M | 15.50 | 12.70 | 6.35 | 0.40 | 0.05 | 0.30 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 | |
| DNMG 150608-F3M | 15.50 | 12.70 | 6.35 | 0.80 | 0.10 | 0.40 | 0.10 | 1.50 | IC830 IC6025 IC6015 IC806 IC807 | |
| DNMG 150612-F3M | 15.50 | 12.70 | 6.35 | 1.20 | 0.15 | 0.50 | 0.20 | 2.50 | IC830 IC6025 IC6015 IC806 IC807 |