DNGA-2 (CBN)
55 rhombic inserts with 2 CBN tips for machining hardened steel’ sintered metals and high temperature alloys
| Designation | L | IC | S | RE | LE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| DNGA 150404-F2 | 15.50 | 12.70 | 4.76 | 0.40 | 2.5 | 0.10 | 0.50 | 0.05 | 0.30 | IB20HC IB10HC | |
| DNGA 150404-M2 | 15.50 | 12.70 | 4.76 | 0.40 | 2.5 | 0.10 | 0.50 | 0.05 | 0.30 | IB10S IB20HC IB10HC | |
| DNGA 150408-F2 | 15.50 | 12.70 | 4.76 | 0.80 | 2.1 | 0.10 | 0.50 | 0.05 | 0.30 | IB20HC IB10HC | |
| DNGA 150408-M2 | 15.50 | 12.70 | 4.76 | 0.80 | 2.1 | 0.10 | 0.50 | 0.05 | 0.30 | IB10S IB20HC IB10HC | |
| DNGA 150408-R2 | 15.50 | 12.70 | 4.76 | 0.80 | 2.1 | 0.05 | 0.50 | 0.05 | 0.20 | IB20H | |
| DNGA 150412-F2 | 15.50 | 12.70 | 4.76 | 1.20 | 2.0 | 0.10 | 0.50 | 0.05 | 0.30 | IB20HC IB10H | |
| DNGA 150412-M2 | 15.50 | 12.70 | 4.76 | 1.20 | 2.0 | 0.10 | 0.50 | 0.05 | 0.30 | IB10S IB20HC IB10HC | |
| DNGA 150412-R2 | 15.50 | 12.70 | 4.76 | 1.20 | 2.0 | 0.05 | 0.50 | 0.05 | 0.20 | IB20H |