DCMT/DCGT-SM
55 Rhombic Inserts with a 7 Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys(+)
| Designation | L | IC | S | RE | D1 | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| DCMT 070202-SM | 7.70 | 6.35 | 2.38 | 0.20 | 2.80 | 0.04 | 0.20 | 0.50 | 2.00 | IC6025 IC6015 IC807 IC907 | |
| DCMT 070204-SM | 7.70 | 6.35 | 2.38 | 0.40 | 2.80 | 0.05 | 0.25 | 0.50 | 2.50 | IC6025 IC8250 IC9250 IC8150 IC9150 IC806 IC807 IC907 | |
| DCMT 070208-SM | 7.70 | 6.35 | 2.38 | 0.80 | 2.80 | 0.07 | 0.25 | 0.50 | 3.00 | IC8250 IC9250 | |
| DCGT 11T302-SM | 11.60 | 9.52 | 3.97 | 0.20 | 4.40 | 0.05 | 0.25 | 0.50 | 2.50 | IC907 | |
| DCGT 11T304-SM | 11.60 | 9.52 | 3.97 | 0.40 | 4.40 | 0.05 | 0.25 | 0.50 | 2.50 | IC907 | |
| DCMT 11T302-SM | 11.60 | 9.52 | 3.97 | 0.20 | 4.40 | 0.05 | 0.25 | 0.50 | 2.50 | IC6025 IC8250 IC9250 IC530N IC6015 IC807 IC907 | |
| DCMT 11T304-SM | 11.60 | 9.52 | 3.97 | 0.40 | 4.40 | 0.07 | 0.25 | 0.50 | 2.50 | IC8350 IC9350 IC6025 IC8250 IC9250 IC530N IC8150 IC9150 IC507 IC806 IC807 IC907 |
|
| DCMT 11T308-SM | 11.60 | 9.52 | 3.97 | 0.80 | 4.40 | 0.07 | 0.25 | 1.00 | 3.00 | IC8350 IC9350 IC6025 IC8250 IC9250 IC6015 IC8150 IC9150 IC507 IC807 IC907 IC9007 |
|
| DCMT 11T312-SM | 11.60 | 9.52 | 3.97 | 1.20 | 4.40 | 0.10 | 0.28 | 1.00 | 3.50 | IC520N |