DCMT/DCGT
55 Rhombic Inserts with a 7 Positive Clearance for Finishing Applications(+)
| Designation | L | IC | S | RE | D1 | ft (min) |
ft (max) |
ap (min) |
ap (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| DCGT 070201R | 7.70 | 6.35 | 2.38 | 0.10 | 2.80 | 0.05 | 0.15 | 0.25 | 1.50 | IC908 | |
| DCGT 070202 | 7.70 | 6.35 | 2.38 | 0.20 | 2.80 | 0.08 | 0.20 | 0.50 | 2.00 | IC30N | |
| DCGT 070204 | 7.70 | 6.35 | 2.38 | 0.40 | 2.80 | 0.10 | 0.25 | 0.80 | 2.50 | IC30N | |
| DCMT 070202 | 7.70 | 6.35 | 2.38 | 0.20 | 2.80 | 0.08 | 0.20 | 0.50 | 2.00 | IC830 IC8250 IC8150 IC20N IC520N | |
| DCMT 070204 | 7.70 | 6.35 | 2.38 | 0.40 | 2.80 | 0.08 | 0.22 | 0.50 | 2.00 | IC830 IC9250 IC30N IC8150 IC9150 IC20N IC520N | |
| DCGT 11T302 | 11.60 | 9.52 | 3.97 | 0.20 | 4.40 | 0.08 | 0.20 | 0.50 | 2.00 | IC30N | |
| DCGT 11T304 | 11.60 | 9.52 | 3.97 | 0.40 | 4.40 | 0.12 | 0.25 | 1.00 | 2.50 | IC30N IC20N | |
| DCMT 11T302 | 11.60 | 9.52 | 3.97 | 0.20 | 4.40 | 0.08 | 0.20 | 0.50 | 2.00 | IC30N IC530N IC20N IC520N | |
| DCMT 11T304 | 11.60 | 9.52 | 3.97 | 0.40 | 4.40 | 0.12 | 0.25 | 0.50 | 2.00 | IC30N IC20N IC520N | |
| DCMT 11T308 | 11.60 | 9.52 | 3.97 | 0.80 | 4.40 | 0.14 | 0.29 | 1.50 | 3.00 | IC830 IC20N IC520N |