CNMA-T/M1/WG (CBN)
80 Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron’ Hardened Steel and Super Alloys(+)
| Designation | L | IC | S | RE | LE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| CNMA 120404T | 12.90 | 12.70 | 4.76 | 0.40 | 3.2 | 0.05 | 0.50 | 0.05 | 0.26 | IB90 IB55 IB50 | |
| CNMA 120408-M1 | 12.90 | 12.70 | 4.76 | 0.80 | 3.5 | 0.05 | 0.50 | 0.05 | 0.30 | IB20H | |
| CNMA 120408T | 12.90 | 12.70 | 4.76 | 0.80 | 3.4 | 0.05 | 0.50 | 0.05 | 0.30 | IB90 IB85 IB55 | |
| CNMA 120408T-WG | 12.90 | 12.70 | 4.76 | 0.80 | 3.5 | 0.05 | 0.50 | 0.05 | 0.30 | IB90 IB85 IB55 IB50 | |
| CNMA 120412-M1 | 12.90 | 12.70 | 4.76 | 1.20 | 3.5 | 0.05 | 0.50 | 0.05 | 0.30 | IB20H | |
| CNMA 120412T | 12.90 | 12.70 | 4.76 | 1.20 | 4.0 | 0.05 | 0.50 | 0.05 | 0.30 | IB55 |