CNGN-Ceramic
80 Rhombic Double-Sided Ceramic Inserts with a T-Land for Machining Cast Iron’ Hardened Steel and Nickel Based Alloys(+)
| Designation | L | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on Grade No. for Cutting Speed |
|
|---|---|---|---|---|---|---|---|---|---|---|
| CNGN 120404T | 12.90 | 12.70 | 4.76 | 0.40 | 1.00 | 3.00 | 0.10 | 0.43 | IW7 IN23 | |
| CNGN 120408E | 12.90 | 12.70 | 4.76 | 0.80 | 1.00 | 3.00 | 0.10 | 0.50 | IS35 IS9 | |
| CNGN 120408T | 12.90 | 12.70 | 4.76 | 0.80 | 1.00 | 3.00 | 0.10 | 0.50 | IW7 IS8 IN23 IN22 IN420 | |
| CNGN 120412E | 12.90 | 12.70 | 4.76 | 1.20 | 1.00 | 5.00 | 0.10 | 0.50 | IS35 | |
| CNGN 120412T | 12.90 | 12.70 | 4.76 | 1.20 | 1.00 | 4.00 | 0.10 | 0.50 | IW7 IN23 | |
| CNGN 120416T | 12.90 | 12.70 | 4.76 | 1.60 | 1.00 | 5.00 | 0.10 | 0.50 | IW7 | |
| CNGN 120708E | 12.90 | 12.70 | 7.94 | 0.80 | 1.00 | 4.00 | 0.10 | 0.50 | IS35 IS9 | |
| CNGN 120708T | 12.90 | 12.70 | 7.94 | 0.80 | 1.00 | 4.00 | 0.10 | 0.50 | IW7 IS35 IS25 IN23 | |
| CNGN 120712E | 12.90 | 12.70 | 7.94 | 1.20 | 1.00 | 5.00 | 0.10 | 0.50 | IS35 | |
| CNGN 120712T | 12.90 | 12.70 | 7.94 | 1.20 | 1.00 | 4.00 | 0.10 | 0.50 | IW7 IS25 IS8 | |
| CNGN 120716T | 12.90 | 12.70 | 7.94 | 1.60 | 1.00 | 5.00 | 0.10 | 0.50 | IW7 IS25 IS80 |