80.2516L5480RLIKI13IM - Radial drill. and mill. head offset, For collet 160 426E (ER16 Ø1-10), long, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i = 1:3 (input equal output), inside collet nut,
Article number: 181354Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER16 DIN6499
- Clamping range Ø1-10
- For collet 160 426E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 50 Nm
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 75.00 mm |
|---|---|
| Total height (OAH) | 64.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 24.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:3 |
| Transmission torque, output drive 1 (DINH201) | 8.00 Nm |
| Shank size | VDI25 |
| Interface size | Collet ER16 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Pin (Bar) |
| Article number | 181354 |
|---|---|
| Product weight | 3.535 KG |