80.2525WNKRG200RLIKW - Radial drill. and mill. head offset, Whistle Notch/Weldon Ø25, with tapered roller bearing, single groove coupling drive, Int. / ext. coolant pmax = 70bar, i = 1:1 (input equal output), W - seration (License INDEX ),
Article number: 177363Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 70.00 mm |
|---|---|
| Total height (OAH) | 68.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 25.00 Nm |
| Max. rotational speed, input (RPMX) | 5000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 25.00 Nm |
| Shank size | VDI25 |
| Interface size | Weldon Ø 25.0 Whistle Notch Ø 25.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | Groove driver |
| Alignment system | W-serration |
| Article number | 177363 |
|---|---|
| Product weight | 4.786 KG |