60.4025WNKRLARULIKX120-S01 - Radial drilling and milling head, Whistle Notch/Weldon Ø25, with tapered roller bearing, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:1 direction of rotation inver., tool length, special design,
Article number: 196171Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Functional length (LF) | 120.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | VDI40 |
| Interface size | Weldon Ø 25.0 Whistle Notch Ø 25.0 |
| Coolant intake | Inner and outer cooling |
| Coupling | Surface coupling |
| Alignment system | Bar |
| Article number | 196171 |
|---|---|
| Product weight | 8.401 KG |