PICCO-016/020-N (Face Grooving)
Inserts with Internal Coolant Channel for Deep Face Grooving(+)
| Designation | DAXN | CW | LU | CDX | DCONMS | a | OAL | HAND | ffg (min) |
ffg (max) |
Grade Click on Grade No. for Cutting Speed | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PICCO R016.0300-10N | 16.0 | 3.00 | 9.00 | 9.00 | 8.00 | 5.50 | 32.00 | R | 0.01 | 0.05 | IC908 | |
| PICCO R016.0300-20N | 16.0 | 3.00 | 19.00 | 19.00 | 8.00 | 5.50 | 41.00 | R | 0.01 | 0.05 | IC908 | |
| PICCO R016.0400-20N | 16.0 | 4.00 | 19.00 | 19.00 | 8.00 | 6.00 | 41.00 | R | 0.01 | 0.05 | IC908 | |
| PICCO R020.0300-25N | 20.0 | 3.00 | 24.00 | 24.00 | 8.00 | 5.50 | 46.00 | R | 0.01 | 0.05 | IC908 | |
| PICCO R020.0300-30N | 20.0 | 3.00 | 29.00 | 29.00 | 8.00 | 5.50 | 51.00 | R | 0.01 | 0.04 | IC908 | |
| PICCO R020.0300-40N | 20.0 | 3.00 | 39.00 | 39.00 | 8.00 | 5.50 | 61.00 | R | 0.01 | 0.04 | IC908 | |
| PICCO R020.0400-25N | 20.0 | 4.00 | 24.00 | 24.00 | 8.00 | 6.00 | 46.00 | R | 0.01 | 0.06 | IC908 | |
| PICCO R020.0400-30N | 20.0 | 4.00 | 29.00 | 29.00 | 8.00 | 6.00 | 51.00 | R | 0.01 | 0.06 | IC908 | |
| PICCO R020.0400-40N | 20.0 | 4.00 | 39.00 | 39.00 | 8.00 | 6.00 | 61.00 | R | 0.01 | 0.05 | IC908 | |
| PICCO R020.0500-25N | 20.0 | 5.00 | 24.00 | 24.00 | 8.00 | 6.50 | 46.00 | R | 0.02 | 0.06 | IC908 | |
| PICCO R020.0500-30N | 20.0 | 5.00 | 29.00 | 29.00 | 8.00 | 6.50 | 51.00 | R | 0.02 | 0.06 | IC908 | |
| PICCO R020.0500-35N | 20.0 | 5.00 | 34.00 | 34.00 | 8.00 | 6.50 | 56.00 | R | 0.02 | 0.05 | IC908 | |
| PICCO R020.0500-40N | 20.0 | 5.00 | 39.00 | 39.00 | 8.00 | 6.50 | 61.00 | R | 0.02 | 0.05 | IC908 |