80.3025CTXRLIM - Radial drill. and mill. head offset, For collet 250 430E (ER25 Ø2-16), DIN 5480 drive, External coolant supply, i = 1:1 (input equal output), inside collet nut,
Article number: 149267Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
| Functional length (LF) | 70.00 mm |
|---|---|
| Total height (OAH) | 64.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 25.00 Nm |
| Max. rotational speed, input (RPMX) | 8000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 25.00 Nm |
| Shank size | VDI30 |
| Interface size | Collet ER25 |
| Coolant intake | Outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Pin (Bar) |
| Article number | 149267 |
|---|---|
| Product weight | 3.676 KG |