60.4032KRLB15L - Radial drilling and milling head, For collet 320 470E (ER32 Ø3-20), with tapered roller bearing, Coupling LB 15/LU15/LB300, External coolant supply, i =1:1 direction of rotation inver.,
Article number: 149593Загрузить PDFRadial drilling and milling head
Premium class tool system for highest production efficiency - Made in Germany
Collet chuck ER32 DIN6499
- Clamping range Ø3-20
- For collet 320 470E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counter-hold can result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 120 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
| Functional length (LF) | 65.00 mm |
|---|---|
| Total height (OAH) | 76.00 mm |
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 50.00 Nm |
| Max. rotational speed, input (RPMX) | 5000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque, output drive 1 (DINH201) | 50.00 Nm |
| Shank size | VDI40 |
| Interface size | Collet ER32 |
| Coolant intake | Outer cooling |
| Coupling | Claw coupling |
| Alignment system | Pin (Bar) |
| Article number | 149593 |
|---|---|
| Product weight | 5.898 KG |