TGTR/L-JHP
Parting and Grooving Tools with Channels for High-Pressure Coolant Carrying TANG-GRIP Inserts(+)
| Designation | CWN | CWX | H | B | WB | OAL | OAH | LH | HBH | CNT | CUTDIA | HAND | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TGTL 1010-2JHP | 1.80 | 2.50 | 10.0 | 10.0 | 1.72 | 100.00 | 19.5 | 18.5 | 5.0 | UNF 5/16-24 | 24.0 | L | |
| TGTR 1010-2JHP | 1.80 | 2.50 | 10.0 | 10.0 | 1.72 | 100.00 | 19.5 | 18.5 | 5.0 | UNF 5/16-24 | 24.0 | R | |
| TGTL 1212-2JHP | 1.80 | 2.50 | 12.0 | 12.0 | 1.72 | 100.00 | 19.5 | 18.5 | 3.0 | UNF 5/16-24 | 24.0 | L | |
| TGTR 1212-2JHP | 1.80 | 2.50 | 12.0 | 12.0 | 1.72 | 100.00 | 19.5 | 18.5 | 3.0 | UNF 5/16-24 | 24.0 | R | |
| TGTL 1616-2JHP | 1.80 | 2.50 | 16.0 | 16.0 | 1.72 | 120.00 | 21.5 | 25.5 | – | UNF 5/16-24 | 35.0 | L | |
| TGTR 1616-2JHP | 1.80 | 2.50 | 16.0 | 16.0 | 1.72 | 120.00 | 21.5 | 25.5 | – | UNF 5/16-24 | 35.0 | R | |
| TGTL 2012-2JHP | 1.80 | 2.50 | 20.0 | 12.0 | 1.72 | 120.00 | 25.6 | 25.5 | – | UNF 5/16-24 | 35.0 | L | |
| TGTR 2012-2JHP | 1.80 | 2.50 | 20.0 | 12.0 | 1.72 | 120.00 | 25.6 | 25.5 | – | UNF 5/16-24 | 35.0 | R | |
| TGTL 1616-3JHP | 2.80 | 3.50 | 16.0 | 16.0 | 2.50 | 120.00 | 24.5 | 25.5 | 3.0 | UNF 5/16-24 | 35.0 | L | |
| TGTR 1616-3JHP | 2.80 | 3.50 | 16.0 | 16.0 | 2.50 | 120.00 | 24.5 | 25.5 | 3.0 | UNF 5/16-24 | 35.0 | R | |
| TGTL 2020-3JHP | 2.80 | 3.50 | 20.0 | 20.0 | 2.50 | 120.00 | 27.0 | 35.0 | – | G 1/8-28 | 54.0 | L | |
| TGTR 2020-3JHP | 2.80 | 3.50 | 20.0 | 20.0 | 2.50 | 120.00 | 27.0 | 35.0 | – | G 1/8-28 | 54.0 | R | |
| TGTL 2525-3JHP | 2.80 | 3.50 | 25.0 | 25.0 | 2.50 | 150.00 | 32.5 | 35.0 | – | G 1/8-28 | 56.0 | L | |
| TGTR 2525-3JHP | 2.80 | 3.50 | 25.0 | 25.0 | 2.50 | 150.00 | 32.5 | 35.0 | – | G 1/8-28 | 56.0 | R | |
| TGTL 2020-4JHP | 3.70 | 4.50 | 20.0 | 20.0 | 3.40 | 120.00 | 27.0 | 35.0 | – | G 1/8-28 | 54.0 | L | |
| TGTR 2020-4JHP | 3.70 | 4.50 | 20.0 | 20.0 | 3.40 | 120.00 | 27.0 | 35.0 | – | G 1/8-28 | 54.0 | R | |
| TGTL 2525-4JHP | 3.70 | 4.50 | 25.0 | 25.0 | 3.40 | 150.00 | 32.5 | 35.0 | – | G 1/8-28 | 56.0 | L | |
| TGTR 2525-4JHP | 3.70 | 4.50 | 25.0 | 25.0 | 3.40 | 150.00 | 32.5 | 35.0 | – | G 1/8-28 | 56.0 | R |