80.5040KR5480RLIKI3X145-S01 - Radial drill. and mill. head offset, For collet 400 472E (ER40 Ø4-26), with tapered roller bearing, DIN 5480 drive, Int. / ext. coolant pmax = 70bar, i = 3:1 same rotating direction, tool length, special design,
Article number: 201600Загрузить PDFRadial drilling and milling head reset
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER40 DIN6499
- Clamping range Ø4-26
- For collet 400 472E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 160 Nm
Tapered roller bearings (KR) - extraordinarily loadable.
- Recommended for machining operations with high torques (e.g.: milling operations with large diameters, threading operations, interrupted cut machining)
- Increase of tool life
- Reduction of service intervals
- Simultaneous radial and axial loads can be easily absorbed
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
| Number of holders, workpiece side (CCONWS) | 1 |
|---|---|
| Max. torque (TQX) | 80.00 Nm |
| Max. rotational speed, input (RPMX) | 4500 min-1 |
| Transmission relation (TR) | 2,947:1 |
| Transmission torque, output drive 1 (DINH201) | 240.00 Nm |
| Shank size | VDI50 |
| Interface size | ER40 |
| Coolant intake | Inner and outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Pin (Bar) |
| Article number | 201600 |
|---|---|
| Product weight | 16.316 KG |