Твердосплавный инструмент для станков с ЧПУ

50.5020HYDVL5LIKI13 - Ax. drill. and mill. head offset, Hydraulic chuck Ø 20, Similar to DIN 1809 drive, Int. / ext. coolant pmax = 70bar, i =1:3 direction of rotation inver.,

Article number: 121427

Axial drilling and milling head with offset axes

Premium class tooling system for highest production efficiency - Made in Germany

Hyrodehn interface

  • High precision clamping
  • Optimum concentricity of the tool cutting edge
  • Good damping against vibrations and chatter
  • Reducing sleeves available to adjust the clamping diameter
  • Clamping of the cutting edge by only one screw
  • No additional fixture necessary
  • Observe tightening torque

Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.

  • 70 bar maximum coolant pressure
  • Not capable of dry running
  • Change between external and internal cooling possible
  • Coolant must be applied to the tool at all times
Загрузить PDF

Total height (OAH) 100.00 mm
Number of holders, workpiece side (CCONWS) 1
Max. torque (TQX) 90.00 Nm
Max. rotational speed, input (RPMX) 4200 min-1
Transmission relation (TR) 1:3
Transmission torque, output drive 1 (DINH201) 30.00 Nm
Shank size VDI50
Interface size Hydraulic chuck Ø 20.0
Coolant intake Inner and outer cooling
Coupling Surface coupling
Alignment system Stop bar, adjustable

Article number 121427
Product weight 11.681 KG

Форма заявки