50.20165480ZRI1IM - Ax. drill. and mill. head offset, For collet 160 426E (ER16 Ø1-10), DIN 5480 drive, External coolant supply, i = 1:2 (input equal output), inside collet nut,
Article number: 156385Загрузить PDFAxial drilling and milling head with offset axes
Premium class tooling system for highest production efficiency - Made in Germany
Collet chuck ER16 DIN6499
- Clamping range Ø1-10
- For collet 160 426E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 50 Nm
| Total height (OAH) | 48.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 16.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:2 |
| Transmission torque, output drive 1 (DINH201) | 8.00 Nm |
| Shank size | VDI20 |
| Interface size | Collet ER16 |
| Coolant intake | Outer cooling |
| Coupling | DIN 867 |
| Alignment system | Pin (Bar) |
| Article number | 156385 |
|---|---|
| Product weight | 2.34 KG |