RPGN 1204 FL
Flat type positive round ceramic inserts for high speed milling of super alloys with low cutting force
| Designation | RE | IC | S | APMX | ap (min) |
ap (max) |
fz (max) |
fz (min) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|---|
| RPGN 1204 FL-E | 6.35 | 12.70 | 4.76 | 6.00 | 0.50 | 2.00 | 0.200 | 0.070 | TC3030 TC3020 |
| RPGN 1204 FL-E04 | 6.35 | 12.70 | 4.76 | 6.00 | 0.50 | 2.00 | 0.200 | 0.070 | TC3030 TC3020 |
| RPGN 1204 FL-T6 | 6.35 | 12.70 | 4.76 | 6.00 | 0.50 | 2.00 | 0.200 | 0.070 | TC3030 TC3020 |