TPGN-CERAMIC
Positive Triangular ground Ceramic inserts of 11 clearance angle without hole for cast iron & hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| TPGN 110304 | 6.35 | 3.18 | 0.40 | 0.10 | 2.00 | 0.05 | 0.10 | AB30 AB20 AB2010 |
| TPGN 110308 | 6.35 | 3.18 | 0.80 | 0.10 | 2.00 | 0.05 | 0.10 | AB30 AB20 AB2010 |
| TPGN 160304 | 9.52 | 3.18 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 AB20 AB2010 |
| TPGN 160308 | 9.52 | 3.18 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB30 AB20 AB2010 |
| TPGN 160308 T6 | 9.52 | 3.18 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | TC430 |
| TPGN 220408 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB30 |