TPET R/L-GF
Precision positive ground Triangular inserts with sharp high rake cutting edge for super finishing of small parts madein steels’ stainless steels & alloy steels
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Grade |
|---|---|---|---|---|---|---|---|---|
| TPET 0802003 L-GF | 4.76 | 2.38 | 0.03 | 0.20 | 1.50 | 0.02 | 0.12 | TT9020 |
| TPET 0802003 R-GF | 4.76 | 2.38 | 0.03 | 0.20 | 1.50 | 0.02 | 0.12 | TT9020 |
| TPET 080201 L-GF | 4.76 | 2.38 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| TPET 080201 R-GF | 4.76 | 2.38 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| TPET 080202 L-GF | 4.76 | 2.38 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |
| TPET 080202 R-GF | 4.76 | 2.38 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |
| TPET 1103003 L-GF | 6.35 | 3.18 | 0.03 | 0.20 | 1.50 | 0.02 | 0.12 | TT9020 |
| TPET 1103003 R-GF | 6.35 | 3.18 | 0.03 | 0.20 | 1.50 | 0.02 | 0.12 | TT9020 |
| TPET 110301 L-GF | 6.35 | 3.18 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| TPET 110301 R-GF | 6.35 | 3.18 | 0.10 | 0.20 | 1.50 | 0.02 | 0.15 | TT9020 |
| TPET 110302 L-GF | 6.35 | 3.18 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |
| TPET 110302 R-GF | 6.35 | 3.18 | 0.20 | 0.30 | 1.50 | 0.03 | 0.17 | TT9020 |