TNGN-CERAMIC
Negative Triangular ground Ceramic inserts without hole for cast iron & hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| TNGN 110308 | 6.35 | 3.18 | 0.80 | 0.10 | 1.00 | 0.05 | 0.15 | AB30 |
| TNGN 160404 | 9.52 | 4.76 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 AB20 |
| TNGN 160408 | 9.52 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AS10 AB30 AB20 AB2010 |
| TNGN 160408 T7 | 9.52 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AW120 |
| TNGN 160412 T7 | 9.52 | 4.76 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | AS500 AW120 |
| TNGN 160412 | 9.52 | 4.76 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | SC10 AB30 AB20 |
| TNGN 160416 T7 | 9.52 | 4.76 | 1.60 | 0.10 | 1.00 | 0.05 | 0.20 | AW120 |