TNGA-CERAMIC
Negative Triangular ground Ceramic inserts with hole forcast iron and hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| TNGA 160404 | 9.52 | 4.76 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 AB20 AB2010 |
| TNGA 160404 T2 | 9.52 | 4.76 | 0.40 | 0.10 | 2.50 | 0.05 | 0.15 | AB30 |
| TNGA 160408 | 9.52 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB30 AB20 AB2010 |
| TNGA 160408 T2 | 9.52 | 4.76 | 0.80 | 0.10 | 2.50 | 0.05 | 0.20 | AB30 |
| TNGA 160412 | 9.52 | 4.76 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | AB20 AB2010 |
| TNGA 160412 T2 | 9.52 | 4.76 | 1.20 | 0.10 | 2.50 | 0.05 | 0.25 | AB30 |
| TNGA 160416 | 9.52 | 4.76 | 1.60 | 0.10 | 2.50 | 0.05 | 0.30 | AB20 |
| TNGA 220404 | 12.70 | 4.76 | 0.40 | 0.10 | 3.00 | 0.05 | 0.15 | AB30 AB20 |
| TNGA 220408 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB30 AB2010 |
| TNGA 220412 | 12.70 | 4.76 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | AB30 AB20 |
| TNGA 220416 | 12.70 | 4.76 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | AB30 AB20 |