TCGW-PCD
Positive Triangular inserts with single PCD tip of positive rake angle for finishing of aluminum & non-ferrous metal
| Designation | LE | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|---|
| TCGW 090204 LN-7 | 3.30 | 5.56 | 2.38 | 0.40 | 0.10 | 2.00 | 0.05 | 0.30 | KP300 |
| TCGW 090208 LN-7 | 3.00 | 5.56 | 2.38 | 0.80 | 0.10 | 2.00 | 0.05 | 0.30 | KP300 |
| TCGW 110204 LN-7 | 3.80 | 6.35 | 2.38 | 0.40 | 0.10 | 2.00 | 0.05 | 0.30 | TD810 KP300 |
| TCGW 110208 LN-7 | 3.50 | 6.35 | 2.38 | 0.80 | 0.10 | 2.00 | 0.05 | 0.30 | KP300 |
| TCGW 16T308 LN-7 | 3.50 | 9.52 | 3.97 | 0.80 | 0.10 | 2.00 | 0.05 | 0.30 | TD810 KP300 |
| TCGW 16T304 LN-7 | 3.80 | 9.52 | 3.97 | 0.40 | 0.10 | 2.00 | 0.05 | 0.30 | KP300 |