SNGA-CERAMIC
Negative Square ground Ceramic inserts with hole for cast iron and hardened steel machining
| Designation | IC | S | RE | ap (min) |
ap (max) |
ft (min) |
ft (max) |
Tough ‹————› Hard Grade & Vc Click on grade for cutting speed value |
|---|---|---|---|---|---|---|---|---|
| SNGA 120404 | 12.70 | 4.76 | 0.40 | 0.10 | 3.00 | 0.05 | 0.15 | AB30 AB20 AB2010 |
| SNGA 120408 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB30 AB20 AB2010 |
| SNGA 120408 S7 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB2010 |
| SNGA 120408 T2 | 12.70 | 4.76 | 0.80 | 0.10 | 3.00 | 0.05 | 0.20 | AB30 |
| SNGA 120412 | 12.70 | 4.76 | 1.20 | 0.10 | 3.00 | 0.05 | 0.25 | AS10 AB30 AB20 AB2010 |
| SNGA 120416 | 12.70 | 4.76 | 1.60 | 0.10 | 3.00 | 0.05 | 0.30 | AS10 SC10 |
| SNGA 190608 | 19.05 | 6.35 | 0.80 | 0.10 | 4.50 | 0.05 | 0.20 | AB30 |
| SNGA 190612 | 19.05 | 6.35 | 1.20 | 0.10 | 4.50 | 0.05 | 0.25 | AB30 |