Артикул: 159126
Swivel head
Swivel heads are suitable for machining at special angles. The stepless adjustability of the angle makes the application extremely flexible which is also the decisive advantage compared to fixed angle heads.
- Stepless angle adjustment — up to +/- 105° depending on the design.
- Neighbor station can be omitted due to the design
- Not suitable for heavy machining
- Not suitable for series production
Premium class tool system for highest production efficiency — Made in Germany
Collet chuck ER25 DIN6499
- Clamping range Ø2-16
- For collet 250 430E
- When tightening the clamping nut it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 90 Nm
Trifix© (TF) alignment system
- Tool completely preset
- Faster setup of your machine
- Repeatability < 6µm at 200mm throat depth
- Positioning accuracy of 0.01mm from one station to another
| Number of holders workpiece side (CCONWS) | 1 |
|---|---|
| Max. torque (TQX) | 20.00 Nm |
| Max. rotational speed input (RPMX) | 10000 min-1 |
| Transmission relation (TR) | 1:1 |
| Transmission torque output drive 1 (DINH201) | 20.00 Nm |
| Shank size | VDI40 |
| Interface size | Collet ER25 |
| Coolant intake | Outer cooling |
| Coupling | DIN 5480 |
| Alignment system | Trifix |
