Артикул: 225519
Axial drilling and milling head
Premium class tool system for highest production efficiency — Made in Germany
Collet chuck ER16 DIN6499
- Clamping range Ø1-10
- For collet 160 426E
- When tightening the clamping nut, it is essential to counterhold the tool spindle.
- Failure to observe the counterholding may result in damage to the gearbox or drive coupling.
- Maximum tightening torque: 50 Nm
Double toothing (Traub license)
- VDI shank double toothed.
- Tool holder can be rotated 180°.
- Note: Rotatability may be restricted by alignment systems (e.g. Trifix).
Internal cooling
Equipped with high-quality seal kits that can withstand coolant pressure of up to 70 bar.
- 70 bar maximum coolant pressure
- Not capable of dry running
- Change between external and internal cooling possible
- Coolant must be applied to the tool at all times
EWS.CyberCon4 — the intelligent tooling system
With the EWS.CyberCon4 sensor system, you get a quick and easy entry into a user-oriented Industry 4.0 solution. Via a free app, you can retrieve information about your tooling system on any common Android or iOS device.
- Acquisition of tool data and limit values:
- Temperature development in the process (current & max.)
- Used speed range (current & max.)
- Service life until next maintenance (recommendation)
- Avoid costly machine downtime
- Open for communication with external interfaces
- Sensor based on Bluetooth Low Energy (BLE) technology
Note: Limited deliverability to third countries, contact us.
| Total height (OAH) | 62.00 mm |
|---|---|
| Number of holders, workpiece side (CCONWS) | 1 |
| Max. torque (TQX) | 15.00 Nm |
| Max. rotational speed, input (RPMX) | 6000 min-1 |
| Transmission relation (TR) | 1:3 |
| Transmission torque, output drive 1 (DINH201) | 5.00 Nm |
| Shank size | VDI25 |
| Interface size | Collet ER16 |
| Coolant intake | Inner and outer cooling |
| Coupling | Groove driver |
